Free Cisco 400-201 Exam Dumps – [Feb-2018 Dumps]

By | February 2, 2018

Once you are up to appear in the Cisco Certified Internetwork Expert Service Provider 400-201 exam. You may come across a variety of websites and platforms that will be facilitating you in achieving your goal. But afterwards you will find it that only a few of them provide you assistance to pass Cisco CCIE Service Provider 400-201 Exam. In order to pass Cisco 400-201 Exam, the most important element is to check the quality of that particular Cisco CCIE Service Provider exam dumps which you are selecting for dragging off your desired 400-201 certification exam.

♥♥ 2018 NEW RECOMMEND 400-201 Exam Questions ♥♥

400-201 exam questions, 400-201 PDF dumps; 400-201 exam dumps:: https://www.dumpsschool.com/400-201-exam-dumps.html (294 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate Cisco 400-201 Dumps Exam Questions and Answers:

Version: 17.0
Question: 21

Refer to the exhibit All PE routers are configured with full-mesh MP-BGP and VPNv4 routing to provide L3VPN services. A central service VRF is implemented, to provide-management and monitoring products to customers with dedicated VRFs .The objective of this design to provide routing between the central services VRF and VRFs A and B. Which implementation achieves this goal?

A. PE1#
vrf definition A
rd 400:1
address-family ipv4
route-target 400:1
PE2#
vrf definition B
rd 500:1
address-family ipv4
route-target 500:1
PE3#
vrf definition SERVICES
rd 1001:1
address-family ipv4
route-target export 1001:1
route-target export 400:1
route-target export 500:1
B. PE1#
vrf definition A
rd 400:1
address-family ipv4
route-target import 1001:1
PE2#
vrf definition B
rd 500:1
address-family ipv4
route-target import 1001:1
PE3#
vrf definition SERVICES
rd 1001:1
address-family ipv4
route-target import 400:1
route-target import 500:1
C. PE1#
vrf definition A
rd 400:1
address-family ipv4
route-target export 400:1
route-target import 1001:1
PE2#
vrf definition B
rd 500:1
address-family ipv4
route-target export 500:1
route-target import 1001:1
PE3#
vrf definition SERVICES
rd 1001:1
address-family ipv4
route-target export 1001:1
route-target import 400:1
route-target import 500:1
D. PE1#
vrf definition A
rd 400:1
address-family ipv4
route-target export 1001:1
PE2#
vrf definition B
rd 500:1
address-family ipv4
route-target export 1001:1
PE3#
vrf definition SERVICES
rd 1001:1
address-family ipv4
route-target export 400:1
route-target export 500:1

Answer: C

Question: 22

Refer to the exhibit. After the BGP TCP negotiation between Router A and Router B, what will be the value of the keep alive timer and the hold-down timer, respectively?

A. 3 seconds and 9 seconds
B. 60 seconds and 180 seconds
C. 10 seconds and 9 seconds
D. no value, because BGP negotiation will not be successful
E. 10 seconds and 10 seconds
F. 10 seconds and 30 seconds
G. 3 seconds and 30 seconds
H. 3 seconds and 10 seconds

Answer: D

Question: 23

An support engineer has been tasked to protect an ISP infrastructure from the growing number of encrypted DDoS attacks. The solution should also validate the eBGP peering. Which solution accomplishes these goals?

A. BGP FlowSpec
B. BTSH
C. BGP Route Dampening
D. BGP LS
E. RTBH

Answer: E

Question: 24

ISP A provides L2VPN services to Company B through an MPLS network. Company B uses all available CoS values to classify and different traffic forwarding within all Company B sites. ISP A uses the following CoS values to differentiate service classes for the VPN customer traffic
*MPLS EXP 0 for Bronze service class
*MPLS EXP 1 for Silver service class
*MPLS EXP 2 for Gold service class
*Remaining MPLS EXP values for ISP A internal use

ISP A’s policy is to forward VPN customer traffic based only on their Bronze, silver and Gold service classes. Which QoS method must ISP A implement to achieve this?

A. Short-pipe Mode
B. Russian Doll Model
C. Pipe Mode
D. Uniform Mode
E. Maximum Allocation Model

Answer: D

Question: 25

Refer to the exhibit, An engineer is asked to troubleshoot packet drops inside a network which option is true?

A. HTTP traffic originated by the 10.10.10.0/24 subnet uses up to 10% of the interface bandwidth. However, if no congestion is present, no more bandwidth is allocated to HTTP traffic
B. SMTP traffic originated by the 10.10.10.0/24 subnet uses up to 10% of the bandwidth, however, if no congestion is present, more bandwidth is allocated to SMTP traffic
C. SMTP traffic originated by the 10.10.10.0/24 subnet uses up to 10% of the bandwidth. However , if no congestion is present, SMTP traffic above 10% of link bandwidth is dropped
D. HTTP traffic originated by the 10.10.10.0/24 subnet uses up to 10% of the interface bandwidth. However, if congestion is present, less bandwidth is allocated to HTTP traffic

Answer: C

Question: 26

Which are the two limitations of the predefined NAT solution?(Choose two)

A. The Bulk port allocation configuration is not available
B. The global port limit parameter is not available for the predefined mode
C. Only the port-presentation option is available
D. NetFlow and syslog are not supported
E. It cannot be configured for each of the inside VRF instance

Answer: A,B

New Updated 400-201 Exam Questions 400-201 PDF dumps 400-201 practice exam dumps: https://www.dumpsschool.com/400-201-exam-dumps.html